Chapter 23
The dress with a waist seam
A dress with a waist seam is a bodice and a skirt, each drafted on its own and joined at the waist.
The bodice is the darted bodice cut at the waist. The skirt here is the gathered skirt: a rectangle wider than the hip, drawn in to the bodice.
What you need
| Measurement | Where the tape goes | Size 38 |
|---|---|---|
| Bust | Round the fullest part of the bust, level all round, under the arms. Wear the bra the garment will be worn with. | 88.0 cm |
| Waist | Round the natural waist, where the body is narrowest, usually just above the navel. | 72.0 cm |
| Neck | Round the base of the neck, over the prominent bone at the back and just above the collarbones at the front. | 36.6 cm |
| Back length (nape to waist) | Down the centre back, from the prominent bone at the base of the neck to the waist. Tie a string round the waist to find it. | 40.6 cm |
| Front length (neck point to waist) | From the side of the neck, over the bust point, straight down to the waist. | 45.0 cm |
| Across back | Across the shoulder blades, from where one arm meets the body to the other, about 10 cm below the nape, arms relaxed. | 34.3 cm |
| Shoulder length | From the side of the neck to the shoulder point, the bone at the end of the shoulder. | 12.2 cm |
| Arm length | From the shoulder point over a slightly bent elbow to the wrist bone. | 60.0 cm |
| Bicep | Round the fullest part of the upper arm, arm relaxed. | 28.0 cm |
| Wrist | Round the wrist over the wrist bone. | 15.8 cm |
| Hip | Round the fullest part of the hips and seat, feet together. | 97.0 cm |
| Waist to hip | Down the side of the body from the waist to the fullest part of the hip or seat. | 21.0 cm |
Draft the dress with waist seam to your measurementsFree to draft, your first PDF free
Watch it drafted
The whole draft, one step at a time. Press play, or step through with the arrows.
Drafting, step by step
Each picture shows everything drawn so far; the new line of the step is in colour. The formulas show the names of the measurements first, then the numbers for size 38.
Back
Step 1
The frame
(Bust + bust ease) ÷ 2= (88.0 + 8.0) ÷ 2 = 48.0 cmThe frame is half the finished bust wide: the back on one side, the front on the other, each cut on the fold. The back is drawn first from the centre back.
Step 1–2
Waist line
Back length (nape to waist) = 40.6The back waist length runs from the nape to the waist down the centre back.
Step 1–3
Bust line
Back length (nape to waist) ÷ 2= 40.6 ÷ 2 = 20.3 cmThe bust line, the widest part of the bodice, sits halfway down the back. The bottom of the armhole will touch it.
Step 1–4
Shoulder blade line
Back length (nape to waist) ÷ 3= 40.6 ÷ 3 = 13.5 cmAcross the shoulder blades the back is at its widest above the bust line. The armhole turns here.
Step 1–5
Back width
Across back ÷ 2 + 1.5= 34.3 ÷ 2 + 1.5 = 18.7 cmThe back is as wide as half the across-back measurement plus a little room for the arms to reach forward.
Step 6
Back neck
back width ÷ 2 − 1 + neck widening= 18.7 ÷ 2 − 1 + 0.0 = 8.3 cmThe neck point is raised 2.5 cm above the nape so the neckline climbs over the top of the shoulder. A small dart in the back neckline takes up the round of the upper back.
Step 6–7
Back shoulder
Shoulder length + shoulder ease= 12.2 + 0.0 = 12.2 cmThe shoulder slopes down 2.5 cm by the back width; its length is the body shoulder.
Step 8
Armhole sector
(Bust + bust ease) ÷ 2 − back width − front width= (88.0 + 8.0) ÷ 2 − 18.7 − 19.7 = 9.7 cmThe armhole is as wide as the frame left between the back and the front widths. The side seam starts in its middle on the bust line.
Step 9
Waist shaping
((Bust + bust ease) − (Waist + waist ease)) ÷ 4= ((88.0 + 8.0) − (72.0 + 4.0)) ÷ 4 = 5.0 cmEach quarter of the body loses this much from bust to waist. A little more than half goes into the side seam, the rest into a dart below the bust line.
Step 10
Outline of the back
The back bodice to the waist, with a centre back seam for the zip.
Front
Step 10
Front length
Front length (neck point to waist) = 45.0The front is drawn from the centre front, longer than the back because it goes over the bust.
Step 11
Front neck
back width ÷ 3= 18.7 ÷ 3 = 6.2 cmThe front neck is a quarter circle round the top corner of the frame.
Step 12
Bust point
(Bust × 0.2 + 0.6) ÷ 2= (88.0 × 0.2 + 0.6) ÷ 2 = 9.1 cmThe bust point sits on the bust line, half the bust span from the centre front. Every bust dart points at it.
Step 13
Bust dart
bust dart width = 6.0The first part of the shoulder runs from the neck towards a point 6 cm below the frame top at the side. The dart opens here and is turned round the bust point; the second part of the shoulder makes up the back shoulder length.
Step 14
Front armhole
back width + 1= 18.7 + 1 = 19.7 cmThe front width is 1 cm more than the back width. The armhole curves in to it and down to the side point on the bust line.
Step 16
Outline of the front
The front bodice to the waist, on the fold.
Gathered skirt
Step 1
Width
(Hip + gathering added to the hip) ÷ 4= (97.0 + 40.0) ÷ 4 = 34.3 cmThe skirt is a rectangle: the hip measure plus as much again as the gathering wants, shared by four quarters.
Step 2
Side
taken off the side at the waist (gathered) = 3.0Taking a little off the side at the waist keeps the gathers from bunching over the hip.
Step 3
Waist
waist lower at the centres (gathered) = 1.8The waist dips at the centre so the hem hangs level.
Step 20
Outline of the skirt front
The skirt front on the fold; the back is the same with a centre seam for the zip. The waist is gathered onto the bodice.
The finished pieces
Sewing it
- Cut and mark. Cut every piece with the grain arrow parallel to the selvedge. Transfer the notches, the dart points and the marks with tailor's chalk or a short snip into the seam allowance.
- Interfacing. Fuse interfacing to the collar, stand, cuffs, waistband, facings and front edges before sewing anything.
- Darts. Sew each dart from the wide end to the point, the last stitches right on the fold. Tie the threads at the point, do not backstitch. Press waist darts towards the centre, bust darts downwards.
- Shoulders. Sew the shoulder seams, the back eased onto the front. Press open.
- Skirt. Run two rows of long stitches along the waist edge of each skirt piece and gather it to the width of its bodice piece.
- Waist seam. Sew each skirt piece to its bodice piece at the waist, the skirt darts or gathers matched to the bodice. The side seams stay open for now. Press the seams up towards the bodice.
- Zip. Sew the centre back seam up to the zip mark and insert an invisible zip.
- Neck facing. Join the front and back neck facings at the shoulders and finish their outer edge. Sew the facing to the neckline right sides together, trim, clip the curve, understitch and turn it inside; tack it down at the shoulder seams.
- Side seams. Sew the side seams, matching the notches. Press open.
- Hem. Turn up the hem twice and stitch, or catch it by hand.
Draft the dress with waist seam to your measurements
The editor draws this pattern for your body in a few seconds, with seam allowance, notches and sewing steps. Your first PDF is free.
Open the dress with waist seamGet new patterns and chapters by e-mail
About once a month. We send a link to confirm, which also opens a free account.