The course

Chapter 35

Buttons

Buttons are measured by their diameter, in millimetres or in lignes, the trade unit: forty lignes make an inch, so one ligne is 0.635 mm.

LignesDiameterTypical use
14 L8.9 mmsmall shirt buttons, cuffs
16 L10.2 mmshirts
18 L11.4 mmshirts, blouses
20 L12.7 mmblouses, cardigans
24 L15.2 mmjacket sleeves, waistcoats
28 L17.8 mmlight jackets
32 L20.3 mmjacket fronts
36 L22.9 mmcoats, blazers
40 L25.4 mmcoats
44 L27.9 mmovercoats
54 L34.3 mmlarge coats
60 L38.1 mmoversized coat buttons

Kinds

  • Flat buttons with two or four holes.
  • Shank buttons, with a loop or a tunnel behind and no holes in front; covered buttons are of this kind.
  • Domed and ball buttons.
  • Snaps, pressed together in two halves.
  • Jewel buttons, decorated with stones or pearls.

Materials

Moulded resins (polyester, acrylic and others) are pressed hot in moulds. Mother-of-pearl, horn, corozo nut, wood and acrylic sheet are turned: cut into discs, shaped front and back, drilled, polished by tumbling, and dyed.

Sewing them on

  • Leave a shank of thread between the button and the cloth, as long as the thickness of the buttonhole layer, so the button does not pull the buttonhole out of shape.
  • On a two-hole button, the stitches run parallel to the buttonhole; on a four-hole button the direction does not matter.
  • A shank button is sewn through its shank only.
Buttons in the editor. Shirts, jackets and coats show their buttons on the pattern and on the figure, with the number to buy listed with the fabric.
Make one

A pattern drafted to your body

Pick a garment, type your measurements and print it at home. The T-shirt and the A-line skirt are free to print, and your first PDF of any other pattern is free.

Choose a pattern
New chapters

Get new patterns and chapters by e-mail

About once a month. We send a link to confirm, which also opens a free account.