Chapter 22
The princess dress
In a princess dress the darts disappear into seams that run from the shoulder over the bust to the hem.
The dress starts as the darted bodice lengthened to the hem. The bust dart is moved a little towards the side, then front and back are each cut in two along their darts.
What you need
| Measurement | Where the tape goes | Size 38 |
|---|---|---|
| Bust | Round the fullest part of the bust, level all round, under the arms. Wear the bra the garment will be worn with. | 88.0 cm |
| Waist | Round the natural waist, where the body is narrowest, usually just above the navel. | 72.0 cm |
| Neck | Round the base of the neck, over the prominent bone at the back and just above the collarbones at the front. | 36.6 cm |
| Back length (nape to waist) | Down the centre back, from the prominent bone at the base of the neck to the waist. Tie a string round the waist to find it. | 40.6 cm |
| Front length (neck point to waist) | From the side of the neck, over the bust point, straight down to the waist. | 45.0 cm |
| Across back | Across the shoulder blades, from where one arm meets the body to the other, about 10 cm below the nape, arms relaxed. | 34.3 cm |
| Shoulder length | From the side of the neck to the shoulder point, the bone at the end of the shoulder. | 12.2 cm |
| Arm length | From the shoulder point over a slightly bent elbow to the wrist bone. | 60.0 cm |
| Bicep | Round the fullest part of the upper arm, arm relaxed. | 28.0 cm |
| Wrist | Round the wrist over the wrist bone. | 15.8 cm |
| Hip | Round the fullest part of the hips and seat, feet together. | 97.0 cm |
| Waist to hip | Down the side of the body from the waist to the fullest part of the hip or seat. | 21.0 cm |
Draft the princess dress to your measurementsFree to draft, your first PDF free
Watch it drafted
The whole draft, one step at a time. Press play, or step through with the arrows.
Drafting, step by step
Each picture shows everything drawn so far; the new line of the step is in colour. The formulas show the names of the measurements first, then the numbers for size 38.
Back
Step 1
The frame
(Bust + bust ease) ÷ 2= (88.0 + 8.0) ÷ 2 = 48.0 cmThe frame is half the finished bust wide: the back on one side, the front on the other, each cut on the fold. The back is drawn first from the centre back.
Step 1–2
Waist line
Back length (nape to waist) = 40.6The back waist length runs from the nape to the waist down the centre back.
Step 1–3
Bust line
Back length (nape to waist) ÷ 2= 40.6 ÷ 2 = 20.3 cmThe bust line, the widest part of the bodice, sits halfway down the back. The bottom of the armhole will touch it.
Step 1–4
Shoulder blade line
Back length (nape to waist) ÷ 3= 40.6 ÷ 3 = 13.5 cmAcross the shoulder blades the back is at its widest above the bust line. The armhole turns here.
Step 1–5
Back width
Across back ÷ 2 + 1.5= 34.3 ÷ 2 + 1.5 = 18.7 cmThe back is as wide as half the across-back measurement plus a little room for the arms to reach forward.
Step 6
Back neck
back width ÷ 2 − 1 + neck widening= 18.7 ÷ 2 − 1 + 0.0 = 8.3 cmThe neck point is raised 2.5 cm above the nape so the neckline climbs over the top of the shoulder. A small dart in the back neckline takes up the round of the upper back.
Step 6–7
Back shoulder
Shoulder length + shoulder ease= 12.2 + 0.0 = 12.2 cmThe shoulder slopes down 2.5 cm by the back width; its length is the body shoulder.
Step 8
Armhole sector
(Bust + bust ease) ÷ 2 − back width − front width= (88.0 + 8.0) ÷ 2 − 18.7 − 19.7 = 9.7 cmThe armhole is as wide as the frame left between the back and the front widths. The side seam starts in its middle on the bust line.
Step 9
Waist shaping
((Bust + bust ease) − (Waist + waist ease)) ÷ 4= ((88.0 + 8.0) − (72.0 + 4.0)) ÷ 4 = 5.0 cmEach quarter of the body loses this much from bust to waist. A little more than half goes into the side seam, the rest into a dart below the bust line.
Step 10
Length
length below the waist = 60.0The dress is the bodice carried on below the waist, through the hip, to the hem.
Step 11
Waist dart
to 5 above the hip line: 16.0 cm
Below the waist the dart runs out 5 cm above the hip line.
Step 12
Panel seam
from the shoulder through the dart to the hem: 7.1 cm
The seam leaves the shoulder where the front seam meets it and runs through the waist dart, so the dart disappears into the seam.
Step 13
Flare
flare each side of the panel seams = 2.0A little flare at each seam lets the skirt move. The two sides of a seam cross below the hip: each piece is cut with its own flare.
Step 14
Outline of the back
The back, from the centre back seam to the panel seam.
Step 15
Outline of the side back
The side back, from the panel seam to the side seam.
Front
Step 10
Front length
Front length (neck point to waist) = 45.0The front is drawn from the centre front, longer than the back because it goes over the bust.
Step 11
Front neck
back width ÷ 3= 18.7 ÷ 3 = 6.2 cmThe front neck is a quarter circle round the top corner of the frame.
Step 12
Bust point
(Bust × 0.2 + 0.6) ÷ 2= (88.0 × 0.2 + 0.6) ÷ 2 = 9.1 cmThe bust point sits on the bust line, half the bust span from the centre front. Every bust dart points at it.
Step 13
Bust dart
bust dart width = 6.0The first part of the shoulder runs from the neck towards a point 6 cm below the frame top at the side. The dart opens here and is turned round the bust point; the second part of the shoulder makes up the back shoulder length.
Step 14
Front armhole
back width + 1= 18.7 + 1 = 19.7 cmThe front width is 1 cm more than the back width. The armhole curves in to it and down to the side point on the bust line.
Step 15
Dart moved
the bust dart 2 towards the side: 2.0 cm
Moving the dart and the bust point 2 cm towards the side gives a slimmer line down the front.
Step 16
Panel seam
down the dart from the shoulder, through the waist dart to the hem: 16.0 cm
The two legs of the bust dart become the two sides of the seam. Below the bust it follows the waist dart and runs out 5 cm above the hip line.
Step 23
Outline of the front
The front, cut on the fold.
Step 24
Outline of the side front
The side front.
The finished pieces
Sewing it
- Cut and mark. Cut every piece with the grain arrow parallel to the selvedge. Transfer the notches and the marks with tailor's chalk or a short snip into the seam allowance.
- Panels. Join the side panels to the back and the front, matching the notches. Press the seams open over a tailor's ham.
- Shoulders. Sew the shoulder seams, the back eased onto the front. Press open.
- Zip. Sew the centre back seam up to the zip mark and insert an invisible zip.
- Neckline. Finish the neckline with a facing or bias binding.
- Side seams. Sew the side seams, matching the notches. Press open.
- Hem. Turn up the hem twice and stitch, or catch it by hand.
Draft the princess dress to your measurements
The editor draws this pattern for your body in a few seconds, with seam allowance, notches and sewing steps. Your first PDF is free.
Open the princess dressGet new patterns and chapters by e-mail
About once a month. We send a link to confirm, which also opens a free account.