The course

Chapter 27

Leather

Most accessories are made of leather: bags, belts, gloves, shoes. Leather is skin made permanent by tanning, and it behaves like no woven fabric. It has no grain line, no selvedge and no two hides alike, so cutting it is a matter of reading the hide.

From skin to leather

A skin has two faces. The outer one, where the hair grew, is the grain; the inner one, against the body, is the flesh. Between them lies the dermis, a felt of long fibres tangled in every direction and tightly bound. That felt is what makes leather strong, and it is the only layer kept.

  1. Preserving. Fresh skins rot within hours, so they are salted, pickled in salt and a little acid, or dried in the air (never in the sun) until they reach the tannery.
  2. Preparing. The skins are soaked back to softness, the flesh side is scraped clean, the hair is loosened and removed, and the skin is swollen in lime. Thick hides are then split into two or three layers of the thickness needed: a heavy layer for soles, a thinner one for uppers and bags.
  3. Tanning. Tanning bonds the fibres so the skin can no longer rot, and gives it its strength and feel. It is done in turning drums, or for sole leather in still pits, because turning would weaken the fibres.
  4. Finishing. The leather is wrung out, dried, shaved level, dyed, oiled to keep it supple, dried again on frames or glass, softened by working it over a blade, and given its surface.

Ways of tanning

TanningHowGives
VegetableTannins from bark, wood, leaves and galls. Slow: from a few weeks in strong baths up to a year and more in pits.Firm, full leather that moulds, ages to a patina and can be tooled and burnished: soles, belts, saddlery, structured bags.
ChromeChromium salts after a salt and acid pickle, a matter of hours or days.Light, soft, strong leather that dyes evenly and resists heat and light: uppers, clothing, most handbags.
OilFish oil worked in repeatedly, then fermented and washed.Very soft, washable leather: chamois, buckskin, some glove leathers.
AlumAluminium salts and common salt, close to chrome tanning.Pale, soft leather; an old method for gloves.
SyntheticOrganic tanning agents, usually helping a vegetable tannage.Faster, more even vegetable leathers.

Surfaces

  • Full grain or nappa: the smooth grain side, untouched. The best and the most honest leather: every mark of the animal shows.
  • Nubuck: the grain side lightly sanded into a fine velvet.
  • Suede: the flesh side, or a split, buffed into a nap.
  • Patent: a thin leather varnished to a high gloss, for shoes and small bags.
  • Embossed: a pattern pressed in with heated plates or rollers, often to imitate a rarer skin.
  • Waxed: the grain rubbed with wax to a soft shine.

Which leather for which job

LeatherCharacterUsed for
Cow and oxThick, compact, nearly waterproof, a fine regular pore.Soles (in full thickness), uppers and bags once split.
CalfFiner and thinner than cow, supple, even pores, a soft shine.The best uppers, handbags, small leather goods, clothing.
Goat and kidCoarser pores, very strong for its weight.Gloves, bags, slippers, hat bands; fine Morocco leathers.
LambVery fine pores, light and soft.Gloves, clothing, fine leather goods.
PigVery strong, pores in groups of three.Linings, gloves, sturdy goods.
Horse, ass, muleHard-wearing; often embossed.Linings, shoes, leather goods.
Ostrich, reptilesRaised quill marks or scales; only the belly is supple enough.Women’s shoes, handbags, belts.

Reading the hide

The back (the croupon, either side of the spine) is the thickest, densest and most even part of a hide, and stretches least. The shoulder is a little looser and often wrinkled. The belly and the legs are thin and stretchy. So:

  • Cut the pieces that show and carry load from the back: the front of a bag, the flap, a belt strap, the vamp of a shoe. Smaller and hidden pieces come from the shoulder; the belly gives linings, reinforcements and keepers.
  • Lay pieces so the leather stretches the way the article may give, never along a strap or a handle. On a glove the stretch goes across the hand.
  • Cut pairs (two gloves, two shoes, the two sides of a bag) from neighbouring parts of the same hide so they match in colour and stretch.
  • Mark flaws on the grain with chalk before cutting and let them fall into seams, holes or waste.
  • Leather is cut single, grain up, with a sharp knife on a board; the patterns are hard templates of card or metal.

Working it

  • Skiving thins an edge from the flesh side so that folds, turned edges and overlapping seams do not become too thick.
  • Gluing holds the layers in place before stitching; leather is not pinned, because a pin leaves a hole for ever.
  • Stitching uses a longer stitch and a stronger thread than fabric: too many holes close together cut the leather like a perforation.
  • Edges are either turned and glued, bound with a strip, or left raw, then bevelled, burnished and dyed.
Imitations. Bonded leather is made from shavings and fibres pressed into sheets; it is used for hidden stiffeners and cheap goods. Vinyl and polyurethane coated fabrics imitate the grain. Vulcanised fibre, a hard board of treated cellulose, gives rigid cases. None of them breathe or age like leather.
Make one

A pattern drafted to your body

Pick a garment, type your measurements and print it at home. The T-shirt and the A-line skirt are free to print, and your first PDF of any other pattern is free.

Choose a pattern
New chapters

Get new patterns and chapters by e-mail

About once a month. We send a link to confirm, which also opens a free account.