Chapter 25
The women's coat
The redingote is a fitted coat: panel seams from the armholes shape the waist and flare out to the hem.
It is drafted on a coat base, which is the fitted jacket base with more ease, a wider shoulder and a deeper armhole. The shoulder dart of the front is closed into the panel seam.
What you need
| Measurement | Where the tape goes | Size 38 |
|---|---|---|
| Bust | Round the fullest part of the bust, level all round, under the arms. Wear the bra the garment will be worn with. | 88.0 cm |
| Waist | Round the natural waist, where the body is narrowest, usually just above the navel. | 72.0 cm |
| Hip | Round the fullest part of the hips and seat, feet together. | 97.0 cm |
| Neck | Round the base of the neck, over the prominent bone at the back and just above the collarbones at the front. | 36.6 cm |
| Back length (nape to waist) | Down the centre back, from the prominent bone at the base of the neck to the waist. Tie a string round the waist to find it. | 40.6 cm |
| Front length (neck point to waist) | From the side of the neck, over the bust point, straight down to the waist. | 45.0 cm |
| Across back | Across the shoulder blades, from where one arm meets the body to the other, about 10 cm below the nape, arms relaxed. | 34.3 cm |
| Shoulder length | From the side of the neck to the shoulder point, the bone at the end of the shoulder. | 12.2 cm |
| Waist to hip | Down the side of the body from the waist to the fullest part of the hip or seat. | 21.0 cm |
| Arm length | From the shoulder point over a slightly bent elbow to the wrist bone. | 60.0 cm |
| Bicep | Round the fullest part of the upper arm, arm relaxed. | 28.0 cm |
| Wrist | Round the wrist over the wrist bone. | 15.8 cm |
Draft the princess coat to your measurementsFree to draft, your first PDF free
Watch it drafted
The whole draft, one step at a time. Press play, or step through with the arrows.
Drafting, step by step
Each picture shows everything drawn so far; the new line of the step is in colour. The formulas show the names of the measurements first, then the numbers for size 38.
Back
Step 1
The frame
(Bust + bust ease) ÷ 2= (88.0 + 16.0) ÷ 2 = 52.0 cmThe frame is half the finished bust wide. The back is drawn from the centre back; the side line is in the middle of the frame.
Step 2
Waist line
Back length (nape to waist) + 2= 40.6 + 2 = 42.6 cmThe back waist length is taken a little longer than on the body, because the garment is worn over others.
Step 3
Bust line
half the back length; the shoulder-blade line a third of that above it: 21.3 cm
The bust line is halfway down the back. A third of that distance above it lies the line where the armhole turns.
Step 4
Shoulder width
(Shoulder to shoulder + 4.5) ÷ 2= (37.2 + 4.5) ÷ 2 = 20.9 cmHalf the shoulder-to-shoulder measure with its ease gives the line the armhole runs along.
Step 5
Back neck
step 4 ÷ 3 + 1= 20.9 ÷ 3 + 1 = 8.0 cmThe neck point stands 2.5 cm above the nape so the neckline climbs over the shoulder.
Step 6
Back shoulder
Shoulder length + 1.5= 12.2 + 1.5 = 13.7 cmThe shoulder slopes 2.5 cm and is a little longer than the body shoulder.
Step 7
Armhole sector
half bust ÷ 5 + 2.5= 52.0 ÷ 5 + 2.5 = 12.9 cmThe sector is the room the arm needs between the back and the front. The armhole runs from the shoulder point along line 4 into the side, 1 below the bust line.
Step 13
Centre back
length from nape = 98.0The centre back seam follows the hollow of the back and swings out to the hem.
Step 14
Panel seam
from the armhole where it turns, through the waist, flared 4.5 each side at the hem: 4.5 cm
The seam takes in the waist between the back and its side panel. Below the hip each piece is cut with its own flare, so the two lines cross.
Step 15
Side seam
a little in at the waist, 6 out at the hem: 6.0 cm
The side seam is nearly straight to the hip and flares to the hem.
Step 11
Outline of the back
The back.
Step 12
Outline of the back side panel
The back side panel.
Front
Step 8
Front length
Front length (neck point to waist) + 2= 45.0 + 2 = 47.0 cmThe front is drawn from the centre front and is longer than the back because it goes over the bust.
Step 9
Front neck
step 4 ÷ 3= 20.9 ÷ 3 = 7.0 cmThe front neck is a quarter circle round the top corner of the frame.
Step 10
Bust point
half the distance between the bust points, + 1: 10.1 cm
The bust point lies on the bust line. Every dart of the front points at it.
Step 11
Shoulder and bust dart
the shoulder towards a point 6 down the side line; the dart opened after a third of the shoulder + 1: 6.5 cm
The dart in the shoulder takes up what the bust is bigger than the chest above it. The second part of the shoulder makes up the shoulder length.
Step 12
Front armhole
half bust − step 4 − sector= 52.0 − 20.9 − 12.9 = 18.3 cmThe armhole curves in to the front width and down into the side, 1 below the bust line.
Step 13
Panel seam
4 beyond the bust point, from the armhole to the hem, flared 4.5: 4.0 cm
The front panel line passes 4 cm outside the bust point.
Step 14
Dart closed
the shoulder dart closed; the part between it and the panel line turned about the bust point: 6.5 cm
Closing the shoulder dart opens the same amount in the panel seam, where it is sewn away without a dart.
Step 15
Extension and buttons
button extension = 3.5The top button sets where the front opens.
Step 21
Outline of the front
The front.
Step 22
Outline of the front side panel
The front side panel.
The finished pieces
Sewing it
- Cut and mark. Cut every piece with the grain arrow parallel to the selvedge. Transfer the notches and the marks with tailor's chalk or a short snip into the seam allowance.
- Interfacing. Fuse interfacing to the collar, stand, cuffs, waistband, facings and front edges before sewing anything.
- Panels. Join the side panels to the back and the front, matching the notches. Press the seams open over a tailor's ham.
- Shoulders. Sew the shoulder seams, the back eased onto the front. Press open.
- Side seams. Sew the side seams, matching the notches. Press open.
- Collar and facings. Sew the facings to the fronts, the under collar to the neckline and the top collar to the facings; turn, roll and press the lapels and collar into shape.
- Sleeves. Sew the two sleeve seams, ease the cap with two rows of long stitches and set the sleeves into the armholes, matching the notches. Add a sleeve head and shoulder pads if used.
- Lining. Sew the lining like the shell: darts, panels, shoulders, side seams and sleeves, leaving 20 cm open in one sleeve seam. Fold the pleat at the centre back and baste it at the neck and the hem. Sew the lining to the inner edge of the facings, right sides together, matching the notches. Join it to the hems of the body and the sleeves about 1.5 cm above its own edge, so a small fold of ease stays at the hem, then turn the garment through the opening and close it.
- Hem. Turn up the hems, catch them by hand and bag the lining in if the garment is lined.
- Buttons. Mark and sew the buttonholes, then the buttons opposite them.
Draft the princess coat to your measurements
The editor draws this pattern for your body in a few seconds, with seam allowance, notches and sewing steps. Your first PDF is free.
Open the princess coatGet new patterns and chapters by e-mail
About once a month. We send a link to confirm, which also opens a free account.