Pattern Index
Open editor
All patterns10 of 58
PreviousNext

Zip jacket

Stand collar, patch pockets. 7 pieces, drawn here for size 50.

Edit in the editor
On the bodyFront and back
Front
Back
Pattern piecesWith seam allowance
BACKFRONTTOPSLEEVEUNDERSLEEVECOLLARPATCH POCKETPOCKET FLAP · 4×
Pieces7
  • Back2×, 34 by 90 cm
  • Front2×, 35 by 91 cm
  • Topsleeve2×, 30 by 71 cm
  • Undersleeve2×, 22 by 62 cm
  • Collar2× on fold, 25 by 10 cm
  • Patch pocket2×, 21 by 26 cm
  • Pocket flap4×, 22 by 8 cm
MeasurementsSize 50
  • Height182.0 cm
  • Chest100.0 cm
  • Waist88.0 cm
  • Seat102.0 cm
  • Neck39.4 cm
  • Nape to waist45.0 cm
  • Scye depth22.0 cm
  • Across back38.4 cm
  • Arm length64.0 cm
  • Bicep33.0 cm
Block settingscm
  • Chest ease23.0
  • Length from nape82.0
  • Armhole depth (over scye)4.0
  • Shoulder extension0.0
  • Shoulder pad lift0.0
  • Neck width adjust0.0
  • Centre back suppression0.5
  • Side waist suppression1.5
  • Front dart0.0
  • Hip ease12.0
  • Button extension0.0
  • Cap ease1.5
  • Sleeve hem width32.0
  • Collar height7.0
Fit checkscm
  • Finished chest123.0
  • Finished waist118.6
  • Finished hip118.7
  • Length from nape82.0
  • Back · armhole · chest width21.2
  • Armhole total59.6
  • Neckline ½24.1
  • Sleeve cap61.1
  • Cap ease1.5
  • Sleeve width47.1
How to sew9 steps
  1. Cut and markCut every piece with the grain arrow parallel to the selvedge. Transfer the notches and the marks with tailor's chalk or a short snip into the seam allowance.
  2. InterfacingFuse interfacing to the collar, stand, cuffs, waistband, facings and front edges before sewing anything.
  3. PocketsMake the pockets and flaps and set them on the fronts while the pieces are flat.
  4. ShouldersSew the shoulder seams, the back eased onto the front. Press open.
  5. Side seamsSew the side seams, matching the notches. Press open.
  6. Collar and facingsSew the facings to the fronts, the under collar to the neckline and the top collar to the facings; turn, roll and press the lapels and collar into shape.
  7. SleevesSew the two sleeve seams, ease the cap with two rows of long stitches and set the sleeves into the armholes, matching the notches. Add a sleeve head and shoulder pads if used.
  8. ZipSet the open-ended zip down the fronts, then close the facing over its tape.
  9. HemTurn up the hems, catch them by hand and bag the lining in if the garment is lined.
Fabricsize 50
  • 110 cm wide2.9 m
  • 140 cm wide2.4 m
  • 150 cm wide2.4 m

Estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.