Patterns
\
Golf jacket
Action-pleat back, patch pockets. 8 pieces, drawn here for size 50.
Edit in the editor- Back2×, 31 by 86 cm
- Side panel2×, 16 by 81 cm
- Front2×, 34 by 87 cm
- Topsleeve2×, 27 by 70 cm
- Undersleeve2×, 20 by 61 cm
- Under collar2×, 19 by 23 cm
- Side pocket2×, 18 by 23 cm
- Breast pocket1×, 13 by 17 cm
- Height182.0 cm
- Chest100.0 cm
- Waist88.0 cm
- Seat102.0 cm
- Neck39.4 cm
- Nape to waist45.0 cm
- Scye depth22.0 cm
- Across back38.4 cm
- Arm length64.0 cm
- Bicep33.0 cm
- Chest ease16.0
- Length from nape78.5
- Armhole depth (over scye)2.5
- Shoulder extension0.0
- Shoulder pad lift1.0
- Neck width adjust0.0
- Centre back suppression0.7
- Side waist suppression1.5
- Side panel front suppression1.5
- Front dart0.0
- Hip ease9.0
- Button extension2.0
- Lapel width8.5
- Collar stand2.8
- Collar fall4.2
- Collar end width3.8
- Vent length24.0
- Cap ease3.5
- Sleeve hem width29.0
- Finished chest116.0
- Finished waist108.4
- Finished hip111.0
- Length from nape78.5
- Back · armhole · chest width20.6
- Armhole total55.7
- Neckline ½21.1
- Sleeve cap59.2
- Cap ease3.5
- Sleeve width42.5
- Cut and markCut every piece with the grain arrow parallel to the selvedge. Transfer the notches and the marks with tailor's chalk or a short snip into the seam allowance.
- InterfacingFuse interfacing to the collar, stand, cuffs, waistband, facings and front edges before sewing anything.
- PocketsMake the pockets and flaps and set them on the fronts while the pieces are flat.
- PanelsJoin the side panels to the back and the front, matching the notches. Press the seams open over a tailor's ham.
- ShouldersSew the shoulder seams, the back eased onto the front. Press open.
- Side seamsSew the side seams, matching the notches. Press open.
- Collar and facingsSew the facings to the fronts, the under collar to the neckline and the top collar to the facings; turn, roll and press the lapels and collar into shape.
- SleevesSew the two sleeve seams, ease the cap with two rows of long stitches and set the sleeves into the armholes, matching the notches. Add a sleeve head and shoulder pads if used.
- HemTurn up the hems, catch them by hand and bag the lining in if the garment is lined.
- ButtonsMark and sew the buttonholes, then the buttons opposite them.
- 110 cm wide2.6 m
- 140 cm wide2.0 m
- 150 cm wide2.0 m
Estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.