• Back2×, 35 by 91 cm
• Back yoke2×, 27 by 14 cm
• Front2×, 35 by 89 cm
• Front yoke2×, 20 by 13 cm
• Sleeve2×, 52 by 61 cm
• Collar2× on fold, 25 by 11 cm
• Hood2×, 32 by 36 cm
• Storm placket2× (1× interfacing), 10 by 82 cm
• Cuff2×, 34 by 14 cm
• Portfolio pocket2×, 21 by 27 cm
• Pocket gusset2×, 65 by 6 cm
• Pocket flap4×, 22 by 9 cm
• Drawstring casing (inside)2×, 66 by 6 cm

• Height182.0 cm
• Chest100.0 cm
• Waist88.0 cm
• Seat102.0 cm
• Neck39.4 cm
• Nape to waist45.0 cm
• Scye depth22.0 cm
• Across back38.4 cm
• Arm length64.0 cm
• Bicep33.0 cm

• Chest ease26.0
• Length from nape86.0
• Armhole depth (over scye)5.0
• Shoulder extension1.3
• Shoulder pad lift0.0
• Neck width adjust0.0
• Centre back suppression0.3
• Side waist suppression0.5
• Front dart0.0
• Hip ease16.0
• Button extension0.0
• Cap ease1.0
• Sleeve hem width34.0
• Collar height8.0
• Hood height (neck to crown)33.0
• Hood depth (face to back)28.0
• Cuff length32.0
• Cuff height6.0

• Finished chest126.0
• Finished waist123.6
• Finished hip121.5
• Length from nape86.0
• Back · armhole · chest width21.4
• Armhole total61.6
• Neckline ½24.1
• Sleeve cap62.6
• Cap ease1.0
• Sleeve width49.5

1. Cut and markCut the outer fabric with the grain along the selvedge; mark the pocket positions, the casing line and the notches. Fuse interfacing to the placket, the collar and the pocket flaps.
2. YokesSew the back yoke to the back and the front yokes to the fronts. Press the seams towards the yoke and topstitch.
3. Portfolio pocketsSew the gusset round the sides and bottom of each pocket, fold it in half and topstitch the folds. Sew the pockets to the fronts. Make the flaps, turn them and sew them above the pockets.
4. Breast zip pocketMark the slanted opening, sew a zip window with a facing, set the zip behind it and close a pocket bag behind.
5. Shoulders and sleevesSew the shoulder seams. Set the sleeves in flat, matching the notches, and topstitch the armhole seam.
6. Side seamsSew the side seam and the sleeve underarm seam in one.
7. CasingMake two eyelets at the front ends of the casing line. Sew the casing strips to the inside along the waist line, thread the drawstring through and stitch it at the centre back.
8. Zip and placketSew the separating zip to the front edges. Make the storm placket, sew it to the right front over the zip and set the snaps.
9. Hood and collarSew the hood together and hem its face edge. Sew the collar, sandwich the hood between the collar and its lining and sew it to the neckline.
10. Cuffs and hemFold the pleats at the sleeve ends, sew on the cuffs. Turn up and stitch the hem.

• 110 cm wide3.4 m
• 140 cm wide3.4 m
• 150 cm wide2.8 m

Estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.