The pattern library130 sewing patterns, drafted to your measurements
Open any pattern to see its pieces and how it is sewn, then make it in your size in the editor. Not in the collection? Draw it in the Studio.
No pattern matches. Try another word, or draw it in the Studio.
Tailored jacketSewing pattern for men, made to measure
Notch lapels, two buttons, centre vent. 16 pieces, drawn here for size 50.
- Skill
- Advanced
- Fabric
- Woven
- Sewing time
- A week or more
- Price
- Free on screen · files with Pro, €10 a month
Measure yourself in the editor and this page shows the fabric for your size.
- Fabric 110 cm wide2.9 m
- Fabric 140 cm wide2.4 m
- Fabric 150 cm wide2.4 m
- Buttons12, plus one spare
- Fusible interfacing1.25 m of 90 cm (36 in) wide, for the fronts, under collar, pocket flap, front facing, back neck facing
- Lining1.50 m of 140 cm (55 in) wide, for back lining, side panel lining, front lining, topsleeve lining, undersleeve lining, pocket bag
- Threadpolyester thread to match, one spool
Fabric is estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.
- Back2×, 27 by 86 cm
- Side panel2×, 17 by 66 cm
- Front2×, 33 by 88 cm
- Topsleeve2×, 28 by 71 cm
- Undersleeve2×, 20 by 60 cm
- Under collar2×, 19 by 25 cm
- Pocket flap4×, 19 by 8 cm
- Front facing2× (+ 2× interfacing), 22 by 88 cm
- Back neck facing2× (+ 2× interfacing), 16 by 11 cm
- Back lining2× lining, 29 by 85 cm
- Side panel lining2× lining, 17 by 66 cm
- Front lining2× lining, 22 by 87 cm
- Topsleeve lining2× lining, 28 by 71 cm
- Undersleeve lining2× lining, 20 by 60 cm
- Piping strip2×, 23 by 6 cm
- Pocket bag4× lining, 22 by 20 cm
- Height182.0 cm
- Chest100.0 cm
- Waist88.0 cm
- Seat102.0 cm
- Arm length64.0 cm
- Bicep33.0 cm
- Finished chest118.5
- Finished waist103.6
- Finished hip111.0
- Length from nape79.5
- Back · armhole · chest width21.3
- Armhole total57.5
- Neckline ½21.7
- Sleeve cap61.0
- Cap ease3.5
- Sleeve width44.9
- Cut and markCut every piece with the grain arrow parallel to the selvedge. Transfer the notches, the dart points and the marks with tailor's chalk or a short snip into the seam allowance.
- InterfacingFuse interfacing to the collar, stand, cuffs, waistband, facings and front edges before sewing anything.
- DartsSew each dart from the wide end to the point, the last stitches right on the fold. Tie the threads at the point, do not backstitch. Press waist darts towards the centre, bust darts downwards.
- PocketsMake the pockets and flaps and set them on the fronts while the pieces are flat.
- PanelsJoin the side panels to the back and the front, matching the notches. Press the seams open over a tailor's ham.
- ShouldersSew the shoulder seams, the back eased onto the front. Press open.
- Side seamsSew the side seams, matching the notches. Press open.
- Collar and facingsSew the facings to the fronts, the under collar to the neckline and the top collar to the facings; turn, roll and press the lapels and collar into shape.
- SleevesSew the two sleeve seams, ease the cap with two rows of long stitches and set the sleeves into the armholes, matching the notches. Add a sleeve head and shoulder pads if used.
- LiningSew the lining like the shell: darts, panels, shoulders, side seams and sleeves, leaving 20 cm open in one sleeve seam. Fold the pleat at the centre back and baste it at the neck and the hem. Sew the lining to the inner edge of the facings, right sides together, matching the notches. Join it to the hems of the body and the sleeves about 1.5 cm above its own edge, so a small fold of ease stays at the hem, then turn the garment through the opening and close it.
- HemTurn up the hems, catch them by hand and bag the lining in if the garment is lined.
- ButtonsMark and sew the buttonholes, then the buttons opposite them.
- Chest ease adjust0.0
- Length adjust0.0
- Armhole depth adjust0.0
- Shoulder extension0.0
- Shoulder pad lift1.0
- Neck width adjust0.0
- Centre back suppression0.8
- Side waist suppression1.8
- Side panel front suppression1.5
- Front dart2.0
- Hip ease9.0
- Button extension2.0
- Lapel width9.5
- Collar stand2.5
- Collar fall4.2
- Collar end width3.8
- Vent length24.0
- Cap ease3.5
- Cap ease placementEvenly round the cap
- Sleeve hem width32.0
- Shoulder slope (+ square, − sloping)0.0
- Set-in pocketsNone
Questions about the tailored jacket
Is the tailored jacket pattern suitable for beginners?
It is marked Advanced. Plan for a week or more of sewing. The sewing steps come with the pattern, in the order to sew them.
How much fabric do I need for the tailored jacket?
About 2.4 m of 150 cm wide fabric in size 50. The editor works it out for your own measurements and fabric width, with a cutting layout.
What fabric should I use?
A woven fabric. The pattern is drafted with the ease a woven fabric needs; the materials list on this page says what else to buy.
Which measurements do I need?
Chest, waist, seat, arm length, bicep and your height. The editor shows where the tape goes for each one, and starts from your nearest size.
Can I print the tailored jacket pattern at home?
Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.
Is the tailored jacket pattern free?
Drafting it to your measurements and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.