Make a pattern
Show

Women's tailored jacketSewing pattern, made to measure

Notched lapel or shawl collar, darted. 9 pieces, drawn here for size 40.

Skill
Advanced
Fabric
Woven
Sewing time
A week or more
Price
Free on screen · files with Pro, €10 a month
Make it in my size
On the bodyFront and back
Front
Back
Pattern piecesWith seam allowance
BACKFRONTSLEEVECOLLARFRONT FACINGBACK NECK FACINGBACK LININGFRONT LININGSLEEVE LINING
What you needsize 40

Measure yourself in the editor and this page shows the fabric for your size.

  • Fabric 110 cm wide2.2 m
  • Fabric 140 cm wide1.7 m
  • Fabric 150 cm wide1.5 m
  • Buttons2, plus one spare
  • Fusible interfacing0.50 m of 90 cm (36 in) wide, for collar, front facing, back neck facing
  • Lining1.00 m of 140 cm (55 in) wide, for back lining, front lining, sleeve lining
  • Threadpolyester thread to match, one spool

Fabric is estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.

Pieces9
  • Back1× on fold, 25 by 65 cm
  • Front2×, 38 by 67 cm
  • Sleeve2×, 40 by 64 cm
  • Collar2× (top collar on the fold, under collar on the bias), 21 by 9 cm
  • Front facing2× (+ 2× interfacing), 18 by 67 cm
  • Back neck facing1× on fold (+ interfacing), 14 by 12 cm
  • Back lining1× lining on fold, 27 by 64 cm
  • Front lining2× lining, 26 by 66 cm
  • Sleeve lining2× lining, 40 by 64 cm
MeasurementsSize 40
  • Height168.0 cm
  • Bust92.0 cm
  • Waist76.0 cm
  • Hip101.0 cm
  • Neck37.2 cm
  • Back length (nape to waist)40.6 cm
  • Front length (neck point to waist)45.4 cm
  • Across back35.9 cm
  • Shoulder length12.3 cm
  • Waist to hip21.0 cm
  • Arm length60.1 cm
  • Bicep29.4 cm
  • Wrist16.2 cm
Fit checkscm
  • Finished bust104.0
  • Finished waist84.0
  • Length from nape59.6
  • Sleeve cap49.7
  • Cap ease2.5
  • Sleeve width37.7
  • Sleeve length61.1
How to sew10 steps
  1. Cut and markCut every piece with the grain arrow parallel to the selvedge. Transfer the notches, the dart points and the marks with tailor's chalk or a short snip into the seam allowance.
  2. InterfacingFuse interfacing to the collar, stand, cuffs, waistband, facings and front edges before sewing anything.
  3. DartsSew each dart from the wide end to the point, the last stitches right on the fold. Tie the threads at the point, do not backstitch. Press waist darts towards the centre, bust darts downwards.
  4. ShouldersSew the shoulder seams, the back eased onto the front. Press open.
  5. Side seamsSew the side seams, matching the notches. Press open.
  6. Collar and facingsSew the facings to the fronts, the under collar to the neckline and the top collar to the facings; turn, roll and press the lapels and collar into shape.
  7. SleevesSew the sleeve seam, ease the cap with two rows of long stitches and set the sleeve into the armhole, matching the notches.
  8. LiningSew the lining like the shell: darts, panels, shoulders, side seams and sleeves, leaving 20 cm open in one sleeve seam. Fold the pleat at the centre back and baste it at the neck and the hem. Sew the lining to the inner edge of the facings, right sides together, matching the notches. Join it to the hems of the body and the sleeves about 1.5 cm above its own edge, so a small fold of ease stays at the hem, then turn the garment through the opening and close it.
  9. HemTurn up the hems, catch them by hand and bag the lining in if the garment is lined.
  10. ButtonsMark and sew the buttonholes, then the buttons opposite them.
Block settingscm
  • CollarNotched lapel
  • Bust ease12.0
  • Waist ease8.0
  • Bust dart toSide seam
  • Bust dart width6.0
  • Shoulder ease0.0
  • Neck widening0.0
  • Extra front neck drop0.0
  • Hip ease8.0
  • Length below waist18.0
  • Button overlap2.5
  • Break point above the waist7.0
  • Collar stand2.0
  • Collar fall4.5
  • Lapel width8.0
  • Notch3.5
  • Collar point4.0
  • Buttons2.0
  • Button spacing10.0
  • Cap ease2.5
  • Cap ease placementEvenly round the cap
  • Sleeve hem width26.0
  • Patch pocketsNone
  • Shoulder slope (+ square, − sloping)0.0
  • Set-in pocketsNone

Questions about the women's tailored jacket

Is the women's tailored jacket pattern suitable for beginners?

It is marked Advanced. Plan for a week or more of sewing. The sewing steps come with the pattern, in the order to sew them.

How much fabric do I need for the women's tailored jacket?

About 1.5 m of 150 cm wide fabric in size 40. The editor works it out for your own measurements and fabric width, with a cutting layout.

What fabric should I use?

A woven fabric. The pattern is drafted with the ease a woven fabric needs; the materials list on this page says what else to buy.

Which measurements do I need?

Bust, waist, hip, neck, back length (nape to waist), front length (neck point to waist), across back, shoulder length, waist to hip, arm length, bicep, wrist and your height. The editor shows where the tape goes for each one, and starts from your nearest size.

Can I print the women's tailored jacket pattern at home?

Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.

Is the women's tailored jacket pattern free?

Drafting it to your measurements and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.

More jackets

Make it
BoleroShort, open front, rounded edgeIntermediateWovenA weekend4 pieces
Make it
Women's waistcoatV-neck, darts, pointed frontIntermediateWovenA weekend6 pieces
Make it
Princess jacketCollarless, princess seamsAdvancedWovenA week or more14 pieces
Step by step
Make it
Tailored jacketNotch lapels, two buttons, centre ventAdvancedWovenA week or more16 pieces
Make it
Golf jacketAction-pleat back, patch pocketsAdvancedWovenA week or more15 pieces

Learn to draft it