• Back1× on fold, 26 by 46 cm
• Front2×, 48 by 48 cm
• Skirt front2×, 58 by 79 cm
• Skirt back1× on fold, 36 by 79 cm
• Wrap and neck binding (bias)1×, 132 by 6 cm
• Tie2×, 92 by 10 cm
• Sleeve2×, 37 by 35 cm
• In-seam pocket bag4× lining, 16 by 29 cm

• Height168.0 cm
• Bust92.0 cm
• Waist76.0 cm
• Hip101.0 cm
• Neck37.2 cm
• Back length (nape to waist)40.6 cm
• Front length (neck point to waist)45.4 cm
• Across back35.9 cm
• Shoulder length12.3 cm
• Waist to hip21.0 cm
• Arm length60.1 cm
• Bicep29.4 cm
• Wrist16.2 cm
• Side length (waist to floor)106.2 cm

• Extra ease0.0
• Length adjust0.0
• Neck widening0.0
• Extra neck depth0.0
• Sleeve length adjust0.0
• Button overlap1.5
• Band width1.5
• Collar stand height3.5
• Collar height4.5
• Collar point length7.0
• Cuff height6.0
• Hood height (neck to crown)34.0
• Hood depth (face to back)25.0
• Side slit length12.0

• Finished bust100.0
• Finished waist80.0
• Waist seam80.0
• Skirt length75.1
• Wrap edge52.8
• Wrap overlap20.0
• Sleeve cap42.5
• Cap ease1.5
• Sleeve width34.4
• Sleeve length31.3

1. Cut and markCut every piece with the grain arrow along the selvedge. Mark the notches, the dart points and the pocket placement with chalk or a short snip into the allowance.
2. InterfacingFuse light interfacing to before sewing anything.
3. DartsSew each dart from the wide end to the point, the last stitches right on the fold. Tie the threads at the point. Press bust darts downwards and waist darts towards the centre.
4. ShouldersSew the front to the back at the shoulders. Neaten and press the seams towards the back.
5. Wrap frontsSew each bodice front to its skirt front at the waist, matching the side seams and the darts. Narrow-hem the front edges of the skirt.
6. TiesFold each tie in half lengthwise, sew the long edge and one end, turn and press. Baste one tie to the end of each front at the waist. Leave a 2 cm gap in the right side seam at the waist for the inner tie to pass through.
7. BindingJoin the bias strips into one. Sew it along the right front wrap edge, round the back neck and down the left wrap edge, turn it fully to the inside and stitch it down.
8. Bodice side seamsSew the bodice side seams and press them open.
9. Skirt side seamsSew the skirt side seams, with the pocket bags in and press them open.
10. Waist seamPin the skirt to the bodice matching the side seams, the centres and the darts, and sew. Neaten the seam and press it up towards the bodice.
11. SleevesSew the underarm seam of each sleeve. Run a row of long stitches round the cap. Pin the sleeve into the armhole, single notch to the front, double notch to the back, the top to the shoulder seam, ease the cap in and sew with the sleeve on top.
12. HemNeaten the raw edge, turn up the hem and stitch it. Hem the sleeves the same way.
13. PressGive the whole garment a final press, with a cloth over the right side.

• 110 cm wide3.9 m, open
• 140 cm wide2.7 m
• 150 cm wide2.7 m

Estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.