The pattern library130 sewing patterns, drafted to your measurements
Open any pattern to see its pieces and how it is sewn, then make it in your size in the editor. Not in the collection? Draw it in the Studio.
No pattern matches. Try another word, or draw it in the Studio.
Hat with centre bandSewing pattern for men, made to measure
Band over the crown, two side panels, brim. 4 pieces, drawn here for size 50.
- Skill
- Intermediate
- Fabric
- Woven
- Sewing time
- An afternoon
- Price
- Free on screen · files with Pro, €10 a month
Measure yourself in the editor and this page shows the fabric for your size.
- Fabric 110 cm wide0.8 m
- Fabric 140 cm wide0.6 m
- Fabric 150 cm wide0.5 m
- Fusible interfacing0.25 m of 90 cm (36 in) wide, for centre band, sweatband
- Threadpolyester thread to match, one spool
Fabric is estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.
- Centre band1× + 1× lining, 40 by 12 cm
- Side panel2× + 2× lining, 22 by 16 cm
- Brim2× (upper and under) + 1× stiffening, 34 by 33 cm
- Sweatband1× leather or grosgrain, 61 by 5 cm
- Head girth57.0 cm
- Head girth57.0
- Head line58.0
- Band seam38.0
- Brim inner edge58.0
- Crown height13.5
- CutCut the centre band once and the side panels twice from fabric and from lining; the brim twice and once from stiffening.
- CrownSew a side panel to each long edge of the centre band, the double notch to the middle of the band, easing round the top. Press the allowances towards the band and topstitch if wanted.
- BrimFuse or baste the stiffening to the upper brim. Sew the centre back seam of each brim layer and press it open. Lay the two brims right sides together, sew round the outer edge, trim, turn and press; topstitch rows 0.6 cm apart from the edge in if the brim should stay firm.
- Brim to crownPin the head line of the brim to the lower edge of the crown, centre front and centre back notches matching, and sew. Press the allowance up into the crown.
- LiningMake up the lining like the crown, slip it inside wrong sides together and baste it to the head line.
- SweatbandSew the sweatband to the inside of the head line by hand or with a long machine stitch, the ends overlapping 1.5 cm at the centre back. Try the hat on: if it is loose, slip a strip of felt or tape behind the sweatband until it sits 2 cm above the hair at the forehead.
- Head line ease1.0
- Centre band width9.5
- Crown height13.5
- Brim width at the front6.0
- Brim width at the back5.0
- Brim slope (wedge at the back)9.0
Questions about the hat with centre band
Is the hat with centre band pattern suitable for beginners?
It is marked Intermediate. Plan for an afternoon of sewing. The sewing steps come with the pattern, in the order to sew them.
How much fabric do I need for the hat with centre band?
About 0.5 m of 150 cm wide fabric in size 50. The editor works it out for your own measurements and fabric width, with a cutting layout.
What fabric should I use?
A woven fabric. The pattern is drafted with the ease a woven fabric needs; the materials list on this page says what else to buy.
Which measurements do I need?
Head girth. The editor shows where the tape goes for each one, and starts from your nearest size.
Can I print the hat with centre band pattern at home?
Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.
Is the hat with centre band pattern free?
Drafting it to your measurements and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.