The pattern library130 sewing patterns, drafted to your measurements
Open any pattern to see its pieces and how it is sewn, then make it in your size in the editor. Not in the collection? Draw it in the Studio.
No pattern matches. Try another word, or draw it in the Studio.
Bucket hatSewing pattern for women, made to measure
Oval top, side band, sloping brim. 6 pieces, drawn here for size 40.
- Skill
- Beginner
- Fabric
- Woven
- Sewing time
- An afternoon
- Price
- Free on screen · files with Pro, €10 a month
Measure yourself in the editor and this page shows the fabric for your size.
- Fabric 110 cm wide0.6 m
- Fabric 140 cm wide0.5 m
- Fabric 150 cm wide0.5 m
- Fusible interfacing0.25 m of 90 cm (36 in) wide, for side band, lining band, sweatband
- Lining0.25 m of 140 cm (55 in) wide, for lining band, lining top
- Threadpolyester thread to match, one spool
Fabric is estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.
- Top1× + 1× lining, 18 by 22 cm
- Side band1× on fold + 1× lining on fold, 29 by 11 cm
- Brim2× (upper and under) + 1× stiffening, 32 by 32 cm
- Lining band1× lining on fold, 28 by 11 cm
- Lining top1× lining, 18 by 21 cm
- Sweatband1× leather or grosgrain, 59 by 5 cm
- Head girth55.8 cm
- Head girth55.8
- Head line56.8
- Top all round56.8
- Brim inner edge56.8
- Brim width front5.8
- Brim width back4.8
- CutCut the top and the side band from the fabric and from the lining, the brim twice and once from stiffening. Mark the notches.
- BandSew the centre back seam of the band, press it open. Sew the band to the top, the centre front and centre back notches matching, clip the allowance of the band and press it down.
- BrimFuse or baste the stiffening to the upper brim. Sew the centre back seam of each brim layer and press it open. Lay the two brims right sides together, sew round the outer edge, trim, turn and press; topstitch rows 0.6 cm apart from the edge in if the brim should stay firm.
- Brim to crownPin the head line of the brim to the lower edge of the crown, centre front and centre back notches matching, and sew. Press the allowance up into the crown.
- LiningMake up the lining like the crown, slip it inside wrong sides together and baste it to the head line.
- SweatbandSew the sweatband to the inside of the head line by hand or with a long machine stitch, the ends overlapping 1.5 cm at the centre back. Try the hat on: if it is loose, slip a strip of felt or tape behind the sweatband until it sits 2 cm above the hair at the forehead.
- Head line ease1.0
- Band height at the front9.0
- Band height at the back8.5
- Top width / length0.83
- Brim width at the front5.8
- Brim width at the back4.8
- Brim slope (wedge at the back)8.5
Questions about the bucket hat
Is the bucket hat pattern suitable for beginners?
Yes. It is marked Beginner: few pieces and a short sewing order. Most people sew it in an afternoon.
How much fabric do I need for the bucket hat?
About 0.5 m of 150 cm wide fabric in size 40. The editor works it out for your own measurements and fabric width, with a cutting layout.
What fabric should I use?
A woven fabric. The pattern is drafted with the ease a woven fabric needs; the materials list on this page says what else to buy.
Which measurements do I need?
Head girth. The editor shows where the tape goes for each one, and starts from your nearest size.
Can I print the bucket hat pattern at home?
Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.
Is the bucket hat pattern free?
Drafting it to your measurements and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.