Make a pattern
Show

Four-panel hatSewing pattern for women, made to measure

Crown of four gores, brim and ribbon. 6 pieces, drawn here for size 40.

Skill
Intermediate
Fabric
Woven
Sewing time
An afternoon
Price
Free on screen · files with Pro, €10 a month
Make it in my size
On the bodyFront and back
Front
Back
Pattern piecesWith seam allowance
CROWN GOREBRIMLINING SIDELINING TOPSWEATBAND · 1× leather or grosgrainHAT BAND · 1× grosgrain ribbon
What you needsize 40

Measure yourself in the editor and this page shows the fabric for your size.

  • Fabric 110 cm wide0.5 m
  • Fabric 140 cm wide0.5 m
  • Fabric 150 cm wide0.5 m
  • Fusible interfacing0.25 m of 90 cm (36 in) wide, for sweatband, hat band
  • Lining0.25 m of 140 cm (55 in) wide, for lining side, lining top
  • Webbing or tape60 cm in all, for hat band
  • Threadpolyester thread to match, one spool

Fabric is estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.

Pieces6
  • Crown gore4×, 17 by 18 cm
  • Brim2× (upper and under) + 1× stiffening, 33 by 32 cm
  • Lining side2× lining, 31 by 14 cm
  • Lining top1× lining, 13 by 16 cm
  • Sweatband1× leather or grosgrain, 59 by 5 cm
  • Hat band1× grosgrain ribbon, 61 by 5 cm
MeasurementsSize 40
  • Head girth55.8 cm
Fit checkscm
  • Head girth55.8
  • Head line56.8
  • Gore seam16.8
  • Brim inner edge56.8
  • Lining top39.8
How to sew7 steps
  1. CutCut 4 gores, the brim twice and once from stiffening, the lining sides and the lining top.
  2. CrownSew the gores together in pairs from the head line to the apex, then join the halves so the points meet in one spot. Press the seams open over a ham and topstitch both sides if wanted.
  3. BrimFuse or baste the stiffening to the upper brim. Sew the centre back seam of each brim layer and press it open. Lay the two brims right sides together, sew round the outer edge, trim, turn and press; topstitch rows 0.6 cm apart from the edge in if the brim should stay firm.
  4. Brim to crownPin the head line of the brim to the lower edge of the crown, centre front and centre back notches matching, and sew. Press the allowance up into the crown.
  5. LiningSew the lining sides together, then sew in the lining top. Slip the lining inside and baste it to the head line.
  6. SweatbandSew the sweatband to the inside of the head line by hand or with a long machine stitch, the ends overlapping 1.5 cm at the centre back. Try the hat on: if it is loose, slip a strip of felt or tape behind the sweatband until it sits 2 cm above the hair at the forehead.
  7. Hat bandWrap the ribbon round the crown over the brim seam, ends overlapping at the left side, and stitch it down by hand at the seams; add a flat bow if wanted.
Block settingscm
  • Head line ease1.0
  • Crown gores4
  • Gore height (apex to head line)15.0
  • Gore curve1.6
  • Brim width at the front6.0
  • Brim width at the back5.0
  • Brim slope (wedge at the back)9.0
  • Ribbon width2.5

Questions about the four-panel hat

Is the four-panel hat pattern suitable for beginners?

It is marked Intermediate. Plan for an afternoon of sewing. The sewing steps come with the pattern, in the order to sew them.

How much fabric do I need for the four-panel hat?

About 0.5 m of 150 cm wide fabric in size 40. The editor works it out for your own measurements and fabric width, with a cutting layout.

What fabric should I use?

A woven fabric. The pattern is drafted with the ease a woven fabric needs; the materials list on this page says what else to buy.

Which measurements do I need?

Head girth. The editor shows where the tape goes for each one, and starts from your nearest size.

Can I print the four-panel hat pattern at home?

Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.

Is the four-panel hat pattern free?

Drafting it to your measurements and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.

More hats and caps

Make it
Bucket hatOval top, side band, sloping brimBeginnerWovenAn afternoon6 pieces
Make it
Peaked beretOval crown, shaped side band, peakIntermediateWovenA weekend5 pieces
Make it
Newsboy capEight or nine soft panels, peak, elastic at the backIntermediateWovenA weekend5 pieces
Make it
Five-panel capOne front panel, peak, touch fastening at the backIntermediateWovenAn afternoon6 pieces
Make it
Cap with centre bandBand from front to back, two side panels, peakIntermediateWovenAn afternoon5 pieces

Learn to draft it