Make a pattern
Show

Six-panel capSewing pattern for men, made to measure

Baseball cap, peak, strap at the back. 5 pieces, drawn here for size 50.

Skill
Intermediate
Fabric
Woven
Sewing time
An afternoon
Price
Free on screen · files with Pro, €10 a month
Make it in my size
On the bodyFront and back
Front
Back
Pattern piecesWith seam allowance
FRONT AND SIDE PANELBACK PANELPEAKINSIDE BAND · 1× cotton tapeBACK STRAP · 2× (one with the buckle)
What you needsize 50

Measure yourself in the editor and this page shows the fabric for your size.

  • Fabric 110 cm wide0.5 m
  • Fabric 140 cm wide0.4 m
  • Fabric 150 cm wide0.4 m
  • Fusible interfacing0.25 m of 90 cm (36 in) wide, for inside band
  • Webbing or tape50 cm in all, for inside band
  • Threadpolyester thread to match, one spool

Fabric is estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.

Pieces5
  • Front and side panel4× + 4× lining, 12 by 18 cm
  • Back panel2× + 2× lining (mirrored), 11 by 18 cm
  • Peak2× + 1× stiffening, 18 by 15 cm
  • Inside band1× cotton tape, 50 by 5 cm
  • Back strap2× (one with the buckle), 18 by 5 cm
MeasurementsSize 50
  • Head girth57.0 cm
Fit checkscm
  • Head girth57.0
  • Crown at the head line57.0
  • Panel seam15.8
  • Peak inner edge17.9
  • Peak depth at the centre7.7
How to sew5 steps
  1. CutCut the panels from fabric and lining (mirror the back ones), the peak twice and once from plastic or board stiffening, the straps and the inside band.
  2. CrownSew the 6 panels together in pairs from the head line to the point, press the seams open and topstitch both sides 0.6 cm off. Join the halves so the points meet; cover the meeting point with a button.
  3. OpeningBind or face the back opening, sew a strap to each side of it, one with the buckle.
  4. PeakLay the two peak pieces right sides together over the stiffening, sew round the outer edge, trim and turn. Topstitch rows 0.6 cm apart parallel to the edge. Baste the peak to the front of the crown, the double notches matching.
  5. Inside bandSew the inside band round the head line over the peak, turn it inside and stitch through all layers from the right side, close to the head line.
Block settingscm
  • Head line ease0.0
  • Panel height15.0
  • Panel side curve1.0
  • Back opening height4.5
  • Peak length12.0
  • Ear flapsOff

Questions about the six-panel cap

Is the six-panel cap pattern suitable for beginners?

It is marked Intermediate. Plan for an afternoon of sewing. The sewing steps come with the pattern, in the order to sew them.

How much fabric do I need for the six-panel cap?

About 0.4 m of 150 cm wide fabric in size 50. The editor works it out for your own measurements and fabric width, with a cutting layout.

What fabric should I use?

A woven fabric. The pattern is drafted with the ease a woven fabric needs; the materials list on this page says what else to buy.

Which measurements do I need?

Head girth. The editor shows where the tape goes for each one, and starts from your nearest size.

Can I print the six-panel cap pattern at home?

Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.

Is the six-panel cap pattern free?

Drafting it to your measurements and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.

More hats and caps

Make it
Hat with centre bandBand over the crown, two side panels, brimIntermediateWovenAn afternoon4 pieces
Make it
Rain hatOval top, sloping band, stitched brimIntermediateWovenAn afternoon6 pieces
Make it
Sailor cap with peakFlat oval crown, straight side band, peakIntermediateWovenA weekend6 pieces
Make it
Docker capSix panels, deep knit turn-up, no peakBeginnerWovenAn afternoon3 pieces
Make it
Trapper hatOval crown, fur band, ear flaps and peakIntermediateFur or pileA weekend5 pieces

Learn to draft it