Make a pattern
Show

Cap with centre bandSewing pattern for women, made to measure

Band from front to back, two side panels, peak. 5 pieces, drawn here for size 40.

Skill
Intermediate
Fabric
Woven
Sewing time
An afternoon
Price
Free on screen · files with Pro, €10 a month
Make it in my size
On the bodyFront and back
Front
Back
Pattern piecesWith seam allowance
CENTRE BANDSIDE PANELPEAKELASTIC · 1× 5.0 cm, stretched to 9.0INSIDE BAND · 1× cotton tape
What you needsize 40

Measure yourself in the editor and this page shows the fabric for your size.

  • Fabric 110 cm wide0.5 m
  • Fabric 140 cm wide0.5 m
  • Fabric 150 cm wide0.5 m
  • Fusible interfacing0.25 m of 90 cm (36 in) wide, for centre band, inside band
  • Elasticfor cut, back: cut it to fit, stretched slightly
  • Webbing or tape50 cm in all, for inside band
  • Threadpolyester thread to match, one spool

Fabric is estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.

Pieces5
  • Centre band1× + 1× lining, 39 by 14 cm
  • Side panel2× + 2× lining, 21 by 13 cm
  • Peak2× + 1× plastic stiffening, 17 by 15 cm
  • Elastic1× 5.0 cm, stretched to 9.0, 11 by 4 cm
  • Inside band1× cotton tape, 49 by 5 cm
MeasurementsSize 40
  • Head girth55.8 cm
Fit checkscm
  • Head girth55.8
  • Band seam33.7
  • Peak inner edge17.5
How to sew5 steps
  1. CutCut the centre band and the side panels from fabric and lining, the peak twice with its stiffening, the elastic and the inside band.
  2. CrownSew the side panels to the long edges of the band, the double notch to the top of the head; press towards the band and topstitch.
  3. BackGather the rounded back end of the band onto the elastic, or finish it with a tab of touch fastening.
  4. PeakLay the two peak pieces right sides together over the stiffening, sew round the outer edge, trim and turn. Topstitch rows 0.6 cm apart parallel to the edge. Baste the peak to the front of the crown, the double notches matching.
  5. Inside bandSew the inside band round the head line over the peak, turn it inside and stitch through all layers from the right side, close to the head line.
Block settingscm
  • Centre band width12.0
  • Side panel height11.0
  • Back elastic5.0
  • Peak length12.0

Questions about the cap with centre band

Is the cap with centre band pattern suitable for beginners?

It is marked Intermediate. Plan for an afternoon of sewing. The sewing steps come with the pattern, in the order to sew them.

How much fabric do I need for the cap with centre band?

About 0.5 m of 150 cm wide fabric in size 40. The editor works it out for your own measurements and fabric width, with a cutting layout.

What fabric should I use?

A woven fabric. The pattern is drafted with the ease a woven fabric needs; the materials list on this page says what else to buy.

Which measurements do I need?

Head girth. The editor shows where the tape goes for each one, and starts from your nearest size.

Can I print the cap with centre band pattern at home?

Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.

Is the cap with centre band pattern free?

Drafting it to your measurements and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.

More hats and caps

Make it
Bucket hatOval top, side band, sloping brimBeginnerWovenAn afternoon6 pieces
Make it
Four-panel hatCrown of four gores, brim and ribbonIntermediateWovenAn afternoon6 pieces
Make it
Peaked beretOval crown, shaped side band, peakIntermediateWovenA weekend5 pieces
Make it
Newsboy capEight or nine soft panels, peak, elastic at the backIntermediateWovenA weekend5 pieces
Make it
Five-panel capOne front panel, peak, touch fastening at the backIntermediateWovenAn afternoon6 pieces

Learn to draft it