• Back1× on fold, 33 by 110 cm
• Front2×, 36 by 110 cm
• Front facing2×, 16 by 110 cm
• Collar stand2× on fold, 23 by 6 cm
• Collar2× on fold, 23 by 10 cm
• Sleeve2×, 44 by 58 cm
• Cuff4×, 26 by 8 cm
• Sleeve placket (bias)2×, 28 by 5 cm
• In-seam pocket bag4× lining, 16 by 29 cm

• Height168.0 cm
• Bust92.0 cm
• Waist76.0 cm
• Hip101.0 cm
• Neck37.2 cm
• Back length (nape to waist)40.6 cm
• Front length (neck point to waist)45.4 cm
• Across back35.9 cm
• Shoulder length12.3 cm
• Waist to hip21.0 cm
• Arm length60.1 cm
• Bicep29.4 cm
• Wrist16.2 cm
• Side length (waist to floor)106.2 cm

• Extra ease0.0
• Length adjust0.0
• Neck widening0.0
• Extra neck depth0.0
• Sleeve length adjust0.0
• Button overlap1.5
• Band width1.5
• Collar stand height3.5
• Collar height4.5
• Collar point length7.0
• Cuff height6.0
• Hood height (neck to crown)34.0
• Hood depth (face to back)25.0
• Side slit length12.0

• Finished bust102.0
• Finished waist90.0
• Finished hip107.0
• Collar stand ½22.1
• Buttons10.0
• Cuff24.2
• Sleeve cap48.6
• Cap ease1.5
• Sleeve width41.6
• Sleeve length55.6

1. Cut and markCut every piece with the grain arrow along the selvedge. Mark the notches, the buttons and buttonholes and the pocket placement with chalk or a short snip into the allowance.
2. InterfacingFuse light interfacing to the front facings, the front facings, one collar and one stand, the cuffs before sewing anything.
3. ShouldersSew the front to the back at the shoulders. Neaten and press the seams towards the back.
4. Front facingsNeaten the inner edge of the facings. Sew each facing to its front edge right sides together, from the hem up to the neckline, turn and press. Baste the facings to the neckline so the collar is sewn on through both layers.
5. Shirt collarSew the collar pieces round the outer edge, trim the points, turn and press. Sandwich the collar between the two stands and sew the stand top edge. Sew the stand to the neckline matching the notches, turn the inner stand over the seam and topstitch round the stand.
6. In-seam pocketsSew a pocket bag to the front and one to the back side seam between the notches and press them outwards.
7. Side seamsSew the side seams, pivoting round the pocket bags at the notches. Neaten and press.
8. SleevesSew the underarm seam of each sleeve. Run a row of long stitches round the cap. Pin the sleeve into the armhole, single notch to the front, double notch to the back, the top to the shoulder seam, ease the cap in and sew with the sleeve on top.
9. CuffsBind the placket slits with the bias strips. Fold the pleats towards the placket, sew the cuffs to the sleeve ends, turn the inner layer over and topstitch.
10. HemNeaten the raw edge, turn up the hem and stitch it. On the curved part, ease the hem in or use a narrow hem.
11. ButtonsSew the buttonholes where marked on the right front (left front for menswear) and sew the buttons on the other front.
12. PressGive the whole garment a final press, with a cloth over the right side.

• 110 cm wide3.5 m
• 140 cm wide2.5 m
• 150 cm wide2.5 m

Estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.