The pattern library130 sewing patterns, drafted to your measurements
Open any pattern to see its pieces and how it is sewn, then make it in your size in the editor. Not in the collection? Draw it in the Studio.
No pattern matches. Try another word, or draw it in the Studio.
Ski glovesSewing pattern for men, made to measure
Separate back and palm, side inserts, shaped thumb, cuff with drawcord. 15 pieces, drawn here for size 50.
- Skill
- Advanced
- Fabric
- Woven
- Sewing time
- A weekend
- Price
- Free on screen · files with Pro, €10 a month
Measure yourself in the editor and this page shows the fabric for your size.
- Fabric 110 cm wide1.0 m
- Fabric 140 cm wide0.8 m
- Fabric 150 cm wide0.8 m
- Fusible interfacing0.25 m of 90 cm (36 in) wide, for palm cuff, upper part, palm cuff, lower part, cuff patch, cuff extension (folded, drawcord)
- Elasticfor cuff: cut it to fit, stretched slightly
- Threadpolyester thread to match, one spool
Fabric is estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.
- Back of the hand1 pair (mirror one), 24 by 37 cm
- Palm (non-slip)1 pair (mirror one), 13 by 23 cm
- Palm cuff, upper part1 pair (mirror one), 11 by 10 cm
- Palm cuff, lower part1 pair (mirror one), 13 by 10 cm
- Palm side strip1 pair (mirror one), 8 by 13 cm
- Cuff patch1 pair (mirror one), 11 by 11 cm
- Thumb, outer part1 pair (mirror one), 8 by 16 cm
- Thumb, inner part (non-slip)1 pair (mirror one), 7 by 10 cm
- Little finger insert1 pair (mirror one), 8 by 21 cm
- Index finger insert1 pair (mirror one), 8 by 19 cm
- Fourchette, index–middle and middle–ring4× (2 per glove), 22 by 7 cm
- Fourchette, ring–little2×, 22 by 8 cm
- Cuff extension (folded, drawcord)2×, 42 by 13 cm
- Wrist strap2× (touch fastening at both ends), 34 by 4 cm
- Strap loop2×, 6 by 3 cm
- Hand girth21.7 cm
- Hand length21.0 cm
- Glove width24.1
- Hand length21.9
- Thumb hole20.1
- Cuff extension40.7
- CutCut the palm, the palm cuff and the inner thumb from a non-slip material, the back and the other parts from the main fabric; the padding and the lining from the same pattern.
- ThumbSew the inner part of the thumb to the outer part round the tip and down both sides. Set the thumb into the hole formed by the palm and the back.
- FingersSew the fourchettes between the fingers, their point at the base of each slit, and the side inserts along the outside of the index and the little finger, first to the palm, then to the back.
- CuffJoin the two parts of the palm cuff, sew them to the palm at the wrist with the side strip, and close the side seams. Gather the wrist with elastic on the marked line.
- ExtensionSew the extension into a ring, fold it double, stitch the channel for the drawcord and sew it to the cuff edge. Thread the drawcord with a stopper.
- StrapSew the strap into the side at the wrist with its loop on the back of the hand, and sew on the touch fastening.
- Fit across the hand (negative: roomier)-2.4
- Cuff below the wrist11.0
- Cuff extension (folded)6.0
Questions about the ski gloves
Is the ski gloves pattern suitable for beginners?
It is marked Advanced. Plan for a weekend of sewing. The sewing steps come with the pattern, in the order to sew them.
How much fabric do I need for the ski gloves?
About 0.8 m of 150 cm wide fabric in size 50. The editor works it out for your own measurements and fabric width, with a cutting layout.
What fabric should I use?
A woven fabric. The pattern is drafted with the ease a woven fabric needs; the materials list on this page says what else to buy.
Which measurements do I need?
Hand girth and hand length. The editor shows where the tape goes for each one, and starts from your nearest size.
Can I print the ski gloves pattern at home?
Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.
Is the ski gloves pattern free?
Drafting it to your measurements and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.