Make a pattern
Show

Long tieSewing pattern, in the size you choose

Interlining, bias cover in three parts, tipping. 7 pieces, drawn here at the usual dimensions.

Skill
Intermediate
Fabric
Woven
Sewing time
An afternoon
Price
Free on screen · files with Pro, €10 a month
Make it, choose the size
PreviewFront and back
Front
Back
Pattern piecesWith seam allowance
COVER, BLADECOVER, NECK PARTCOVER, TAIL ENDINTERLININGBLADE TIPPINGTAIL TIPPING · 1× liningKEEPER LOOP · 1×
What you need
  • Fabric 110 cm wide1.1 m
  • Fabric 140 cm wide1.0 m
  • Fabric 150 cm wide1.0 m
  • Lining0.25 m of 140 cm (55 in) wide, for blade tipping, tail tipping
  • Interlining145 cm long, cut as the pattern piece
  • Threadpolyester thread to match, one spool

Fabric is estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.

Pieces7
  • Cover, blade1× on the bias, 79 by 19 cm
  • Cover, neck part1× on the bias, 49 by 12 cm
  • Cover, tail end1× on the bias, 30 by 12 cm
  • Interlining1× wool interlining, on the bias, 147 by 9 cm
  • Blade tipping1× lining, 17 by 11 cm
  • Tail tipping1× lining, 13 by 8 cm
  • Keeper loop1×, 8 by 4 cm
Fit checkscm
  • Finished length145.0
  • Blade width8.0
  • Narrowest width3.5
How to sew5 steps
  1. CutLay the cover pieces at exactly 45° to the selvedge; four to six ties come out of a metre. Cut the interlining on the bias too and the tippings from lining.
  2. JoinSew the three cover pieces together on their bias joins, press the seams open.
  3. TippingSew a tipping to each point, right sides together, turn and press so it sits 0.3 cm inside the edge.
  4. CloseLay the interlining on the wrong side, fold the long edges over it and close the tie down the back with a long, loose slip stitch so it stays supple; leave a little slack thread at the end.
  5. FinishSew the keeper loop and the label across the back of the blade, 20 cm from the point. Press lightly without flattening the rolled edges.
Block settingscm
  • Finished length145.0
  • Blade width8.0
  • Tail width4.3
  • Narrowest width (at the neck)3.5
  • Cover turn-in each side1.0
  • Tipping length11.0

Questions about the long tie

Is the long tie pattern suitable for beginners?

It is marked Intermediate. Plan for an afternoon of sewing. The sewing steps come with the pattern, in the order to sew them.

How much fabric do I need for the long tie?

About 1.0 m of 150 cm wide fabric in size 50. The editor works it out for your own measurements and fabric width, with a cutting layout.

What fabric should I use?

A woven fabric. The pattern is drafted with the ease a woven fabric needs; the materials list on this page says what else to buy.

Can I print the long tie pattern at home?

Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.

Is the long tie pattern free?

Drafting it in the size you choose and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.

More accessories

Make it
Bow tie to tieButterfly shape, adjustable bandBeginnerWovenAn afternoon1 piece
Make it
AscotWide ends crossed on the chest, narrow neck bandBeginnerWovenAn afternoon1 piece
Make it
Pocket square and handkerchiefSquare with a rolled hemBeginnerWovenAn afternoon1 piece
Make it
BeltLeather strap, buckle end, keeperBeginnerLeatherAn afternoon2 pieces
Make it
Umbrella coverGores for a ribbed frameIntermediateWovenAn afternoon2 pieces

Learn to draft it