Make a pattern
Show

Men's fitted glovesSewing pattern for men, made to measure

One-piece hand, thumb and fourchettes, leather. 5 pieces, drawn here for size 50.

Skill
Advanced
Fabric
Leather
Sewing time
A weekend
Price
Free on screen · files with Pro, €10 a month
Make it in my size
PreviewFront and back
Front
Back
Pattern piecesWith seam allowance
GLOVETHUMBFOURCHETTE 1FOURCHETTE 2FOURCHETTE 3
What you needsize 50

Measure yourself in the editor and this page shows the fabric for your size.

  • Leatherabout 19 dm² (2.1 sq ft) of glove leather, 0.5–0.8 mm, the stretch across the hand
  • Elasticfor cuff: cut it to fit, stretched slightly
  • Threadpolyester or nylon thread to match; a leather needle (wedge point) and clips instead of pins
Pieces5
  • Glove1 pair (mirror one), 20 by 26 cm
  • Thumb1 pair (mirror one), 9 by 13 cm
  • Fourchette 12×, then halve, 3 by 10 cm
  • Fourchette 22×, then halve, 3 by 10 cm
  • Fourchette 32×, then halve, 3 by 10 cm
MeasurementsSize 50
  • Hand girth21.7 cm
  • Hand length21.0 cm
Fit checkscm
  • Glove width19.5
  • Hand length21.0
  • Glove size8.5
  • Thumb hole19.9
How to sew6 steps
  1. CutLay the leather with its stretch across the hand, never along the fingers. Cut the glove, the thumb and the fourchettes, mirroring the second glove. Cut the thumb hole and the slits.
  2. ThumbFold the thumb on its fold line and sew the seam from the tip down to the slit. Set it into the thumb hole, the V of the hole to the V of the thumb, and sew round, easing the base.
  3. PointsDecorate the back of the hand with three rows of stitching or cording now, while the glove is flat, if wanted.
  4. FourchettesFourchette 1 goes between the little and ring finger, 2 between the ring and middle finger, 3 between the middle and index finger. Cut each fourchette in two along its centre line. Sew the halves to the sides of the fingers, starting at the base of each slit and working up round the tip, first on the palm, then on the back.
  5. Side seamClose the side seam from the cuff up the outside of the little finger.
  6. CuffTurn back and stitch the cuff edge or bind it with a narrow strip of leather; add a strap, a button or an elastic at the wrist.
Block settingscm
  • Fit across the hand (less than the girth)2.2
  • Cuff length below the wrist5.0
  • Fourchette extra length (trimmed when sewn)1.0
  • Fourchettes with gussetsOff

Questions about the men's fitted gloves

Is the men's fitted gloves pattern suitable for beginners?

It is marked Advanced. Plan for a weekend of sewing. The sewing steps come with the pattern, in the order to sew them.

How much fabric do I need for the men's fitted gloves?

About 0.4 m of 150 cm wide fabric in size 50. The editor works it out for your own measurements and fabric width, with a cutting layout.

What fabric should I use?

Leather. The materials list on this page says what else to buy.

Which measurements do I need?

Hand girth and hand length. The editor shows where the tape goes for each one, and starts from your nearest size.

Can I print the men's fitted gloves pattern at home?

Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.

Is the men's fitted gloves pattern free?

Drafting it to your measurements and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.

More gloves

Make it
Ski glovesSeparate back and palm, side inserts, shaped thumb, cuff with drawcordAdvancedWovenA weekend15 pieces
Make it
Women's fitted glovesOne-piece hand, thumb and fourchettes, leatherAdvancedLeatherA weekend5 pieces

Learn to draft it