The pattern library130 sewing patterns, drafted to your measurements
Open any pattern to see its pieces and how it is sewn, then make it in your size in the editor. Not in the collection? Draw it in the Studio.
No pattern matches. Try another word, or draw it in the Studio.
Flat toteSewing pattern, in the size you choose
Fabric, turned top, ribbon handles running under the bag. 5 pieces, drawn here at the usual dimensions.
- Skill
- Beginner
- Fabric
- Woven
- Sewing time
- An afternoon
- Price
- Free on screen · files with Pro, €10 a month
- Fabric 110 cm wide0.7 m
- Fabric 140 cm wide0.7 m
- Fabric 150 cm wide0.7 m
- Main fabric0.44 m of 140 cm wide
- Leather trima piece of about 1 dm², 1–1.5 mm, for label tab
- Lining0.44 m of 140 cm wide (canvas, cotton or moleskin)
- Zipinner pocket, 20 cm
- Ziptop zip 37 cm (optional)
- Threadstrong polyester thread, a jeans needle for heavy fabric
Fabric is estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.
- Front and back2× fabric, 41 by 50 cm
- Lining2× lining, 41 by 42 cm
- Inner zip pocket lining1× lining (folded in half), 25 by 88 cm
- Handle ribbons2× webbing or ribbon 4 cm, 135 by 4 cm
- Label tab1× leather, doubled, 8 by 2 cm
- Ribbon135.0
- CutCut the fabric and lining pieces; fuse interfacing to the panels if the fabric is soft.
- RibbonsTopstitch the ribbons down the front, under the bottom and up the back, along the marked lines, leaving the handle loops free above the top.
- SidesSew the side and bottom seams.
- LiningMake up the lining like the bag, slip it inside wrong sides together and sew it to the facing or the top edge.
- TopTurn the top in on the fold line over the lining and topstitch.
- Width38.5
- Height44.0
- Turned top5.0
- Bottom corner rounding2.0
- Ribbon length each135.0
Questions about the flat tote
Is the flat tote pattern suitable for beginners?
Yes. It is marked Beginner: few pieces and a short sewing order. Most people sew it in an afternoon.
How much fabric do I need for the flat tote?
About 0.7 m of 150 cm wide fabric in size 40. The editor works it out for your own measurements and fabric width, with a cutting layout.
What fabric should I use?
A woven fabric. The pattern is drafted with the ease a woven fabric needs; the materials list on this page says what else to buy.
Can I print the flat tote pattern at home?
Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.
Is the flat tote pattern free?
Drafting it in the size you choose and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.