Make a pattern
Show

Flap shoulder bagSewing pattern, in the size you choose

Back and flap in one, bound edges, magnet. 9 pieces, drawn here at the usual dimensions.

Skill
Advanced
Fabric
Leather
Sewing time
A weekend
Price
Free on screen · files with Pro, €10 a month
Make it, choose the size
PreviewFront and back
Front
Back
Pattern piecesWith seam allowance
BACK AND FLAPBACK AND FLAP LININGFRONTGUSSET (SIDES AND BOTTOM)INNER ZIP POCKET LININGSHOULDER STRAP (DOUBLED) · 1× leather, doubledBINDING · 1× leather 0.6 mmSTRAP TABS · 2× leatherCLOSING TAB · 2× leather (magnet between)
What you need
  • Leatherabout 4.9 sq ft (46 dm²) with 30% for the shape of the hide; 1–1.5 mm for the body, thinner for the lining and the turned edges
  • Lining0.25 m of 140 cm wide (canvas, cotton or moleskin)
  • Zipinner pocket, 18 cm
  • Hardwaremagnetic snap
  • Hardware2 D-rings or half-rings, 2 cm
  • Hardwarebuckle 2 cm
  • Stiffeningthin board or bonded fibre in the flap and back
  • Threadwaxed linen or polyester saddle thread, a leather needle; contact cement or latex for gluing
Pieces9
  • Back and flap1× leather, 24 by 40 cm
  • Back and flap lining1× thin leather, 24 by 40 cm
  • Front1× leather + 1× lining, 24 by 18 cm
  • Gusset (sides and bottom)1× leather + 1× lining, 58 by 7 cm
  • Inner zip pocket lining1× lining (folded in half), 21 by 40 cm
  • Shoulder strap (doubled)1× leather, doubled, 100 by 2 cm
  • Binding1× leather 0.6 mm, 187 by 2 cm
  • Strap tabs2× leather, 7 by 4 cm
  • Closing tab2× leather (magnet between), 17 by 4 cm
Fit checkscm
  • Gusset58.3
  • Back and flap40.0
  • Binding186.6
How to sew5 steps
  1. CutCut the leather pieces from the best part of the hide, the stretch across the bag. Skive the edges that are turned or folded, and the seam edges for turned work. Cut the lining and the stiffening.
  2. Inner pocketCut the zip opening in the lining, sew the zip in behind it and the pocket lining to the zip tapes, fold the pocket up and close its sides.
  3. FlapGlue the back-and-flap lining to the back-and-flap, wrong sides together. Fix the magnet half to the closing tab and the other half to the front.
  4. Assemble (bound)Lay the panels and the gusset wrong sides together, sew them close to the edge and cover the edge with the binding strip, folded over it and stitched.
  5. StrapFold and stitch the strap, sew the tabs with their rings to the ends of the gusset, and buckle the strap on.
Block settingscm
  • Width24.0
  • Height18.0
  • Depth7.0
  • Flap length (below the top)15.0
  • Corner rounding2.0
  • Shoulder strap length100.0

Questions about the flap shoulder bag

Is the flap shoulder bag pattern suitable for beginners?

It is marked Advanced. Plan for a weekend of sewing. The sewing steps come with the pattern, in the order to sew them.

What fabric should I use?

Leather. The materials list on this page says what else to buy.

Can I print the flap shoulder bag pattern at home?

Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.

Is the flap shoulder bag pattern free?

Drafting it in the size you choose and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.

More bags

Make it
Soft flap bagTurned work, box corners, handles through the flapIntermediateLeatherA weekend6 pieces
Make it
Rounded tote with braided handlesShaped panels, tapered gusset, facingIntermediateLeatherA weekend7 pieces
Make it
Zip pouch bagSmall crossbody, piped, zip across the topIntermediateLeatherA weekend8 pieces
Make it
Soft zip shoulder bagTrapezoid panels, curved zip top, separate bottomIntermediateLeatherA weekend5 pieces
Make it
Baguette bagLow and long, piped gusset, zip strips, short handleIntermediateLeatherA weekend6 pieces

Learn to draft it