Make a pattern
Show

Boiler suitSewing pattern for men, made to measure

One piece workwear, zip front, elastic back waist, collar stand. 6 pieces, drawn here for size 50.

Skill
Advanced
Fabric
Woven
Sewing time
A week or more
Price
Free on screen · files with Pro, €10 a month
Make it in my size
On the bodyFront and back
Front
Back
Pattern piecesWith seam allowance
BACKFRONTSLEEVECOLLAR STAND · 2× on foldCHEST POCKETBACK WAIST ELASTIC (CUT LENGTH) · 1× elastic
What you needsize 50

Measure yourself in the editor and this page shows the fabric for your size.

  • Fabric 110 cm wide4.6 m, open
  • Fabric 140 cm wide4.1 m
  • Fabric 150 cm wide3.4 m
  • Zip18–20 cm, for the fly or the side
  • Fusible interfacing0.25 m of 90 cm (36 in) wide, for collar stand
  • Elasticfor back waist elastic: cut it to fit on the body, stretched slightly
  • Threadpolyester thread to match, one spool

Fabric is estimated from the pieces laid out with seam allowance, grain along the selvedge. Add more for matching checks or stripes. The editor shows the layout.

Pieces6
  • Back2×, 61 by 166 cm
  • Front2×, 40 by 162 cm
  • Sleeve2×, 51 by 68 cm
  • Collar stand2× on fold, 21 by 6 cm
  • Chest pocket1×, 15 by 20 cm
  • Back waist elastic (cut length)1× elastic, 21 by 5 cm
MeasurementsSize 50
  • Height182.0 cm
  • Chest100.0 cm
  • Seat102.0 cm
  • Neck39.4 cm
  • Arm length64.0 cm
  • Bicep33.0 cm
  • Wrist17.5 cm
  • Waist88.0 cm
  • Outside leg105.5 cm
  • Body rise27.0 cm
Fit checkscm
  • Finished chest122.0
  • Body length ease5.0
  • Side seam back − front0.0
  • Collar ½19.7
  • Finished seat115.0
  • Crotch depth29.0
  • Crotch seam total79.3
  • Inseam back − front-0.5
  • Knee width53.1
  • Leg opening46.0
How to sew12 steps
  1. Cut and markCut every piece with the grain arrow parallel to the selvedge. Transfer the notches and the marks with tailor's chalk or a short snip into the seam allowance.
  2. InterfacingFuse interfacing to the collar, stand, cuffs, waistband, facings and front edges before sewing anything.
  3. PocketsMake the chest pocket and sew it on the left front while the pieces are flat.
  4. ShouldersSew the shoulder seams, the back eased onto the front. Press open.
  5. Collar standSew the collar stand to the neckline, matching the centre back and the shoulder notches, and close it from the inside.
  6. SleevesEase the sleeve caps and sew the sleeves into the open armholes, matching the notches.
  7. Side and sleeve seamsSew the side seams on into the sleeve underarm seams in one line, from the leg hem to the sleeve end.
  8. Inside legSew the inside leg seams, matching the knee notches.
  9. Crotch and centre seamsTurn one leg into the other and sew the crotch seam from the zip mark at the front, round through the crotch and up the centre back to the neck. Sew it twice through the crotch.
  10. ZipInsert the zip in the centre front from the neck to the zip mark.
  11. Back waist elasticStitch a casing across the inside of the back at the waist, thread the elastic and stitch its ends down at the side seams.
  12. HemsTurn up the sleeve and leg hems twice and stitch.
Block settingscm
  • Chest ease22.0
  • Seat ease12.0
  • Body length ease (blousing)5.0
  • Crotch depth ease2.0
  • Leg opening46.0
  • Extra knee width2.0
  • Shoulder extension2.5
  • Armhole drop4.0
  • Neck widening1.0
  • Front neck drop1.0
  • Cap ease1.0
  • Cap ease placementEvenly round the cap
  • Sleeve hem width30.0
  • Stand height4.0
  • Chest pocket width13.0

Questions about the boiler suit

Is the boiler suit pattern suitable for beginners?

It is marked Advanced. Plan for a week or more of sewing. The sewing steps come with the pattern, in the order to sew them.

How much fabric do I need for the boiler suit?

About 3.4 m of 150 cm wide fabric in size 50. The editor works it out for your own measurements and fabric width, with a cutting layout.

What fabric should I use?

A woven fabric. The pattern is drafted with the ease a woven fabric needs; the materials list on this page says what else to buy.

Which measurements do I need?

Chest, seat, neck, arm length, bicep, wrist, waist, outside leg, body rise and your height. The editor shows where the tape goes for each one, and starts from your nearest size.

Can I print the boiler suit pattern at home?

Yes. It prints on A4 or Letter pages that you tape together; page one has a 10 cm test square to check the scale. You can also print it on one A0 sheet at a copy shop.

Is the boiler suit pattern free?

Drafting it to your measurements and seeing every piece is free. A free account gets one tiled PDF of any pattern free; every other print and file is part of Pro.

More trousers

Step by step
Make it
TrousersCreased trouser blockIntermediateWovenA weekend9 pieces
Make it
Slim trousersDarted waist, tapered legIntermediateWovenA weekend9 pieces
Make it
Pleated trousersTwo forward pleats, slant pocketsIntermediateWovenA weekend9 pieces
Make it
Cargo trousersBellows pockets, shaped kneeIntermediateWovenA weekend9 pieces
Make it
JeansFive pockets, back yokeAdvancedWovenA weekend11 pieces

Learn to draft it